Interior Doors
Interior Door Installation and Replacement
Zane's Door Replacement provides interior door replacement for homeowners updating one room or several openings.
As an experienced interior door installer, Bryan Zane helps homeowners pick the right door and installation method for each room, taking into account the existing jamb and the available wall space.
Project Process
We Handle the Entire Interior Door Installation, Start to Finish
We supply and install your interior doors ourselves, one company handling selection through final install instead of you juggling separate providers.
We handle:
- the site visit
- the measurement
- material guidance
- ordering
- installation
- and debris removal
This approach gives the renovating homeowner one point of contact for the interior door installation process. Homeowners usually supply their own door hardware, and hinges and locksets can be matched for color and finish.
Planning the Replacement
The Interior Door Installation Process
Before calling, identify the rooms you want to update, whether the jamb and casing will remain, the door type you are considering, and whether the project includes one opening or several.
1
Discuss the interior door replacement goal.
Identify the room, door type, desired appearance, and whether the existing jamb will remain. This establishes the replacement path before materials are ordered.
2
Measure the opening and determine wall space needed
Bryan Zane measures the opening before materials are specified and ordered. Measurement connects the selected door to the conditions at the home.
3
Choose the Type of Door and Installation
The homeowner and Bryan Zane decide between a slab, pre-hung unit, pocket door, or barn door based on the opening and the homeowner’s plan. Pocket and barn-door selections also depend on the required wall space.
4
Install and check operation
Zane's Door Replacement installs the selected interior door, removes the old door and debris, and checks that the door opens and closes completely. The final installation check is visual and manual.
Installation Checks
A Correctly Installed Interior Door Opens and Closes Completely
An interior door that is poorly specified or installed can become inoperable. Over time, the door fails and does not open and close as it should.
Zane's Door Replacement visually checks each installed interior door and opens and closes the door completely by hand.
What We Review Before Completion
If an existing installation has failed and needs correction rather than a standard replacement, see Correcting a Failed Installation.
Replacement Options
Interior Door Replacement Begins With the Existing Jamb and Available Wall Space
Interior door replacement decisions depend on:
- whether the existing jamb will remain
- the room being updated
- and the wall space available for the selected configuration.
Zane's Door Replacement helps homeowners choose between a slab (the door only), pre-hung unit (a door with the jamb included), pocket door, or barn door before materials are ordered.
Choose the Interior Door Replacement Option
Slab replacement
A slab replacement retains the existing jamb and is an option for homeowners who do not want to remove the full opening. The homeowner and Bryan Zane decide whether retaining the existing jamb supports the planned replacement.
Pre-hung interior door
A pre-hung interior door includes the door and jamb as one unit. This option applies when the jamb and casing are being replaced too or when the homeowner is making a more complete visual update.
Pocket door
Jeld-A pocket door requires enough interior wall cavity to accept the door panel when it is open. The available wall space determines whether this configuration can be used.
Barn door
A barn door requires enough room above the opening to install track hardware and enough clear wall space for the panel to slide. The available wall space determines whether this sliding-door configuration can be used.
More Door Installations
For more information about our door replacement and installations, see Door Replacement. If an opening is overrides or historic, it may be outside a standard replacement scope. See Oversized and Historic Openings.
Door Selection
Solid-Core Doors or Hollow-Core Doors?
Bryan Zane recommends solid-core interior doors for most rooms in a house, and always for bedrooms and bathrooms. Hollow-core interior doors are generally used for other interior doors for some homeowners, but in general, most of our customers choose to install new solid-core doors throughout their home.
The final selection should account for the room and the homeowner’s planned interior update. Zane's Door Replacement reviews the door type and replacement path with the homeowner before materials are ordered.
Compare Interior Door Core Options
| Solid core | Bedrooms and bathrooms, and most other interior doors | Our recommendation for these rooms |
| Hollow core | To save funds | Generally used for other interior openings |
Panel Profile and Configurations
Interior Door Panel Profiles and Configurations Give Homeowners Defined Design Choices
Interior replacement doors are available in one-panel, two-panel, three-panel, five-panel, and six-panel designs. Panel profile is a homeowner design choice within the planned renovation.
Zane's Door Replacement can also review size variation and configuration before ordering. We will confirm the opening and verify the selected door is the best option for each doorway in your home.
Interior Door Configurations
Swing Doors
Standard swing doors are installed in a conventional framed opening. They can be specified as a slab or as a pre-hung unit.
Pocket doors
Pocket doors require enough interior wall cavity to accept the panel when it is open. The wall cavity must be considered before selecting this configuration.
Barn doors
Barn doors require mounting room above the opening and clear wall space for the panel to slide. The hardware location and wall clearance must be considered before selecting this configuration.
Panel-profile doors
One-, two-, three-, five-, and six-panel profiles provide distinct design options. Homeowners can select a panel profile as part of the interior renovation plan.
Multi-Door Updates
A Multi-Door Renovation Can Require Different Decisions at Each Opening
If you are considering updating multiple doors in your home, you may need to make different decisions at each opening. Each opening can require its own choice of core, panel profile, size, configuration, jamb retention, and hardware.
Homeowners do not need to choose every interior door in the same way. Bedrooms and bathrooms may use solid-core doors, while other rooms may use hollow-core doors or another configuration that the available wall space supports.
Service Area
Zane's Door Replacement Provides Interior Door Replacement on the Monterey Peninsula, in Salinas, and in Santa Cruz
Zane's Door Replacement serves homeowners on the Monterey Peninsula, as well as Salinas and Santa Cruz. The business is based in Monterey, California, and works with homeowners who are renovating individual rooms or coordinating a broader door replacement project.
Interior door replacement is available in Monterey, Pacific Grove, Carmel-by-the-Sea, and Salinas. For the full list of communities served, see all service areas.
For exterior door openings, see Exterior Doors. For patio or sliding door projects, see Patio and Sliding Doors.
Zane's Door Replacement is the trading name of Zanes Door Specialist. California contractor license 1039955 · C-61/D28, Doors, Gates and Activating Devices.
Frequently asked questions